| REF | PART NUMBER | DESCRIPTION |
|---|
| 1 | 12239-60020 | Sheet feeder assembly - Feeds sheet paper into printer (12239A) |
| 2 | 02235-60059 | Paper bail assembly - Attaches to platen roller assembly |
| 3 | 02235-20006 | Bail spring - Located on left side of paper bail |
| 4 | 02235-60053 | Platen roller assembly |
| 5 | 02235-40017 | Bearing/latch - One on each end of platen roller - (Two used) |
| 6 | 02235-00017 | Pinch Roller Spring Plate - Under Platen Roller |
| 7 | 02235-20022 | Pinch roller - Four used |
| 8 | 02235-00034 | Paper Tension Spring Plate - Below Pinch Roller Plate |
| 9 | 02235-40068 | Print mechanism core - Includes NO attaching parts - For serial prefix < 2735A, also order -40078 and -60093 |
| 10 | 02235-40086 | Lever arm - Actuator for paper out sensor |
| 11 | 02235-00021 | Left ground plane - Attached to left side of print structure |
| 12 | 02235-00022 | Right ground plane - Between paper motor and print mechanism |
| 13 | 02235-00023 | Back ground plane - Attaches to back of print mechanism |
| 14 | 02235-80004 | Carriage 'home' sensor assembly |
| 15 | 02235-80005 | 'Paper out' sensor assembly |
| 16 | 02235-60092 | Cable assembly for printhead - Cable Assembly - from Main Logic Board to Printhead |
| 17 | 02235-60070 | Printhead assembly |
| 02235-69070 | Printhead assembly |
| 18 | 02235-00026 | Printhead cable clip - Printhead cable clip - Attaches to printhead |
| 19 | 02235-00024 | Printhead cable wearstrip clip - Wearstrip clip - Holds printhead cable wearstrip in place |
| 20 | 02235-20012 | Upper guide rail - Shaft that the printhead rides on |
| 21 | 02235-60093 | Paper gap adjust lever - On left end of upper guide rail |
| 22 | 02235-40011 | Carriage belt |
| 23 | 02235-20004 | Idler pulley - For carriage belt tension |
| 24 | 02235-40091 | Pulley wedge - For carriage belt tension |
| 25 | 02235-20020 | Carriage belt tension spring for pulley wedge |
| 26 | 02235-60091 | Carriage drive motor - Mounts on right side of print mechanism |
| 27 | 02235-60056 | Paper drive motor - Mounts on right side of print mechanism |
| 28 | 02235-20011 | Lower guide rail - Shaft that the printhead rides on |
| 29 | 02235-00009 | Motor retainer - Holds both motors in place |
| 30 | 02235-60075 | Tractor drive shaft assembly - Includes pinfeed wheels |
| 31 | 02235-20019 | Tractor shift lever spring - Located on right end of drive shaft |
| 32 | 02235-60035 | Left tractor assembly - Clips over pinfeed wheel on drive shaft |
| 33 | 02235-60036 | Right tractor assembly - Clips over pinfeed wheel on drive shaft |
| 34 | 02235-40056 | Carriage motor insulator (Isolator) - Tee shaped |
