| | 03630-60724 | | Primer absorber (Large) - At bottom of primer assembly | | NO LONGER SUPPLIED |
|
| | 03630-40202 | | Paper sensor arm - Pivots on shim assembly | | NO LONGER SUPPLIED |
|
| | 03630-40303 | | Paper bail arm (Below window) - Lift this to load paper | | NO LONGER SUPPLIED |
|
| | 03630-60001 | | Base assembly - Bottom cover | | NO LONGER SUPPLIED |
|
| | 1500-0693 | | Carriage belt | | NO LONGER SUPPLIED |
|
| | 03630-60715 | | Lead frame brush (Cleaning tool) - Stores in the recess on the bottom of the printer | | NO LONGER SUPPLIED |
|
| | 03630-60210 | | Ribbon cable which connects the main logic board to the print mechanism - Ribbon Cable - from Main Logic Board to Print Mechanism | | NO LONGER SUPPLIED |
|
| | 92215S | | RS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long - For connecting Apple Macintosh with LocalTalk/serial connector |
|
| | 03630-60501 | | Carriage assembly - Includes carriage PC board | | NO LONGER SUPPLIED |
|
| | 51606A | | Black print cartridge - Prints approximately 900 pages of standard text |
|
| | 51606C | | Color print cartridge (contains cyan, magenta, and yellow) - Prints approximately 300 pages at 15% density (each color) |
|
| | C1662-40001 | | Top cover | | NO LONGER SUPPLIED |
|
| | 03630-40701 | | Motor clamp - Secures motor to left side of print mech | | NO LONGER SUPPLIED |
|
| | 03630-40003 | | Cable clipe - Cable clip for trailing cable - Attaches to print mechanism | | NO LONGER SUPPLIED |
|
| | 03630-60004 | | Control panel assembly - Includes ribbon cable | | NO LONGER SUPPLIED |
|
| | 03630-60097 | | Lift up front cover - Protects the print cartridges - Attaches to the right side of the top case - Includes the wiper pad and spring | | NO LONGER SUPPLIED |
|
| | C1662-60010 | | Front cover - Protective cover for print cartridges - Attaches to the top case | | NO LONGER SUPPLIED |
|
| | 03630-60616 | | Right side tractor drive (sprocket) cover (shield) | | NO LONGER SUPPLIED |
|
| | 03630-60617 | | Left side tractor drive (sprocket) cover (shield) | | NO LONGER SUPPLIED |
|
| | 51630S | | Color InkJet CX transparency film - A4 size (21.0cm x 29.7cm) - 50 sheets |
|
| | 51630Q | | Color InkJet CX transparency film - A size (8.5 x 11-inches) - 50 sheets |
|
| | 03630-40402 | | Platen gear - Attaches to end of platen roller | | NO LONGER SUPPLIED |
|
| | 03630-40704 | | Cluster gear - Between media motor and platen gear | | NO LONGER SUPPLIED |
|
| | 03630-40721 | | Small absorber holder - In primer assembly | | NO LONGER SUPPLIED |
|
| | 03630-40302 | | Upper pinchwheel holder - On bottom of bail arm (2 used) | | NO LONGER SUPPLIED |
|
| | C1662-40003 | | Platen knob - On right side of printer | | NO LONGER SUPPLIED |
|
| | 03630-40309 | | Head latch - Retains print cartridge in carriage assembly | | NO LONGER SUPPLIED |
|
| | 03630-90000 | | 3630A PaintJet printer hardware support manual - Use this and C1662-90010 for service of C1662A PaintWriter | | NO LONGER SUPPLIED |
|
| | C1662-90001 | | C1662A PaintWriter printer user's guide | | NO LONGER SUPPLIED |
|
| | C1662-90002 | | C1662A PaintWriter printer getting started guide | | NO LONGER SUPPLIED |
|
| | C1662-90010 | | C1662A PaintWriter printer CE handbook insert | | NO LONGER SUPPLIED |
|
| | 3140-0812 | | Carriage belt drive motor - Mounts on left end of print mechanism | | NO LONGER SUPPLIED |
|
| | 3140-0813 | | Paper drive motor - Mounts on left end of print mechanism | | NO LONGER SUPPLIED |
|
| | C1662-68105 | | Main logic board - With RS-422-A and eight pin DIN connector - Main Logic Board - with RS-422-A - Eight Pin DIN Connector | | NO LONGER SUPPLIED |
|
| | C1812A | | Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes | | |
|
| | C6039A | | Premium Photo paper (Glossy) - A size (8.5 x 11-inches) - 15 sheets | | |
|
| | C6817A | | Brochure and Flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 48lb bond, 98 brightness - 50 sheets per box | | |
|
| | C6979A | | Premium Photo paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets | | |
|
| | Q7852A | | Advanced Glossy Photo paper - A size (8.5 x 11-inches) - 25 sheets | | |
|
| | C6983A | | Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package | | |
|
| | 51630R | | Z-Fold InkJet CX paper - A4 size (21.0cm x 29.7cm) finished sheets - 250 sheets per package |
|
| | 51630Z | | Color InkJet CX cut sheet paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package |
|
| | 51630P | | Z-Fold InkJet CX paper - A size (8.5 x 11-inches) finished sheets - 250 sheets per package |
|
| | 51630Y | | Color InkJet CX cut sheet paper - A size (8.5 x 11-inches) - 200 sheets per package |
|
| | C1824A | | Bright white InkJet paper - A size (8.5 x 11-inches) - 500 sheets per package |
|
| | C6828A | | Greeting card paper pack (Ivory, Matte) - A size (8.5 x 11-inches) - Felt textured - Includes 20 sheets and 20 envelopes | | |
|
| | C6955A | | Professional Brochure and Flyer paper (Matte) - A size (8.5 x 11-inches) - 50 sheets |
|
| | C7007A | | Photo Quality InkJet paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets | | |
|
| | C7018A | | Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), 9 mil thickness, half fold, pre-scored - Includes 20 cards and 20 envelopes | | |
|
| | C7019A | | Textured Greeting Card (White) - A size (8.5 inches x 11 inches), half-fold | | |
|
| | 03630-60316 | | Lower Pinchwheel - Attaches to shim assembly (2 used) | | NO LONGER SUPPLIED |
|
| | C1662-00003 | | Cover Plate - For I/O connector on main logic board | | NO LONGER SUPPLIED |
|
| | 03630-20405 | | Platen roller - Long roller between tractor drive assemblies | | NO LONGER SUPPLIED |
|
 | 17222B | | Power module (transformer, Lucent 3301B2) - 220VAC input, 50Hz, 0.25A - 10-0-10VAC output, 50Hz, 2A, 40VA - Has attached AC power cord (for 220V in Europe) |
|
| | 9100-4503 | | Power module (transformer) - 120VAC input, 60Hz - 20VAC output, 2A output - Has attached NEMA 5-15P power cord (USA, Canada) - (17122B) | | RESTRICTED SALES (NOT FOR TRADE SALE) |
|
| | 9100-4505 | | Power module (transformer, Lucent 3301B2) - 220VAC input, 50Hz, 0.25A - 10-0-10VAC output, 50Hz, 2A, 40VA - Has attached AC power cord (for 220V in Europe) - (Same as 17222B) | | NO LONGER SUPPLIED |
|
| | 9100-4507 | | Power module (transformer) - 100VAC input, 50-60Hz - 20VAC output, 2A - Has attached AC power cord (Japan) - (Same as 17322B) | | NO LONGER SUPPLIED |
|
| | 03630-40713 | | Primer bladder (thimble shaped) - Part of primer assembly | | NO LONGER SUPPLIED |
|
| | 03630-60096 | | Primer assembly - Includes absorber holder, absorber, primer bladder, primer lid, and primer spring | | NO LONGER SUPPLIED |
|
| | C2114-40052 | | Idler pulley with bearing - Mounts on idler shaft | | NO LONGER SUPPLIED |
|
| | 03630-20306 | | Slider rod - Shaft that the carriage assembly rides on | | NO LONGER SUPPLIED |
|
| | C1662-40004 | | Paper separator - Attaches to center of top case | | NO LONGER SUPPLIED |
|
| | 03630-20212 | | Upper pinchwheel shaft - Mounts to bottom of paper bail arm | | NO LONGER SUPPLIED |
|
| | 03630-40204 | | Left sideplate - Mounting structure for drive motors | | NO LONGER SUPPLIED |
|
| | C1662-60012 | | Driver software - For Apple/Macintosh | | NO LONGER SUPPLIED |
|
| | 1460-2147 | | Compression spring - Stainless steel, passivity finish, 0.709in long, 0.466in OD, 0.036in wire diameter, 10.08 in/lb rate - Applies pressure to the tension wedge for the carriage belt pulley | | NO LONGER SUPPLIED |
|
| | 03630-00301 | | Upper pinchwheel spring - Located on bottom of paper bail arm | | NO LONGER SUPPLIED |
|
| | 03630-20305 | | Bail spring on both sides of bail arm - Attaches to both sides of bail arm | | NO LONGER SUPPLIED |
|
| | C1633-60051 | | Starwheel assembly - Small plastic wheel with metal teeth - Mounts to bottom of bail arm (four used) | | NO LONGER SUPPLIED |
|
| | 03630-00508 | | Encoder strip - Next to and as long as carriage slider rod | | NO LONGER SUPPLIED |
|
| | 03630-60810 | | Right side tractor drive (sprocket) assembly on platen roller | | NO LONGER SUPPLIED |
|
| | 03630-60811 | | Left side tractor drive (sprocket) assembly on platen roller | | NO LONGER SUPPLIED |
|
| | C1662A+49A-00 | | Self paced training kit for 3630A PaintJet and C1662A PaintWriter - Includes service manual and one test | | NO LONGER SUPPLIED |
|
| | C1662+49A-90001 | | Additional self paced training test - Contains 1 test for 3630A & C1662A | | NO LONGER SUPPLIED |
|
| | 9100-4509 | | Power module (transformer) - 240VAC input, 50Hz - 20VAC output, 2A - Has attached AC power cord (United Kingdom) - (Same as 17422B) | | NO LONGER SUPPLIED |
|
| | 9100-4519 | | Power module (transformer) - 220VAC input, 50Hz - 20VAC output, 2A (China) - (Same as 17922B) | | NO LONGER SUPPLIED |
|
| | 9100-4522 | | Power module (transformer) - 240VAC input, 50Hz - 20VAC output, 2A - (Australia, New Zealand) - (Same as 17722B) | | NO LONGER SUPPLIED |
|
| | 9100-4524 | | Power module (transformer) - 220VAC input, 50Hz - 20VAC output, 2A (Switzerland) - (Same as 17522B) | | NO LONGER SUPPLIED |
|
| | 9100-4526 | | Power module (transformer) - 220VAC input, 50Hz - 20VAC output, 2A (South Africa) - (Same as 17622B) | | NO LONGER SUPPLIED |
|
| | 9100-4528 | | Power module (transformer) - 220VAC input, 50Hz - 20VAC output, 2A (Denmark) - (Same as 17822B) | | NO LONGER SUPPLIED |
|
| | 03630-40802 | | Pulley wedge - For carriage belt tension | | NO LONGER SUPPLIED |
|
| | 03630-40310 | | Bail window - Attaches to paper bail arm | | NO LONGER SUPPLIED |
|
