1
2
3
4
5
6
7
8
9
10
11
11
12
13
14
14
15
16
17
18
19
20
21
22
23
24
25
26
27

DeskJet 1000C Series - Main Assembly Locator
 
REFPART NUMBERDESCRIPTION
1C2670-60105Paper input tray extender (Stop) - Extends from the bottom of the paper tray to accommodate different media lengths
2C2670-60104Paper output tray assembly - Output tray assembly - Includes Quartz Gray plastic output tray body, slide out smoked plastic tray extender, and envelope width stop - Attaches to front of printer
3C2670-60115Pinch roller - Ensures contact between paper and main roller
4C2670-60113Drive roller assembly - Shaft with five rubber rollers
5C2670-60131Carriage drive motor - Includes pulley
6C2670-60119Carriage drive belt - Moves printhead side to side
7C2670-60134Paper pick separator assembly - Separates the top piece of paper from the rest of the stack during the pick process
8C2670-60118Encoder strip - Carriage position sensor reference
9C2678-60104Sensor assembly - Sensor assembly - Includes OOPS flag and door actuator sensors
10C2678-60115Print Platen - Surface that supports paper during printing - Includes shaft and five 1 inch rubber rollers
11C2670-60107Paper input tray side covers - Covers the left and right sides of the input tray
12C2670-60106Paper input tray assembly - Includes media width adjuster
13C2670-60138Pickup roller assembly - Shaft with 2 rollers - Picks paper from paper input tray
14C2670-60109Stopper guides - Mounts on the bottom of the printer and guides the paper input tray stopper
15C2670-60116Flex cable clamp - Includes carriage flex cable
16C2670-60108Base assembly - Metal base for the rest of the printer
17C2670-60133Motor harness cable with ferrite - 15-pin (F) connector to 29.5cm (11.6in) cable with 6-pin (F) connector, 33.8cm (13.3in) cable with 3-pin (F) connector, and 40.6cm (16in) cable with 6-pin (F) connector - From main logic board to motors
18C2670-60124Service station assembly - Includes the tumbler, sponge, motor, blotter assembly, and chimney wall
19C2670-60132Keypad PC board assembly - Includes cable - Installed in top cover
20C2678-60105Ink cartridge carriage assembly - This item should be replaced only by trained, experienced service personnel
21C2670-60121Carriage PC board - Carriage PC Board - Mounts on carriage
22C2670-60102Front case - Includes front covers and carriage access door
23C2670-60101Main logic PCA - With basic font (International version)
24C8099-67015Power supply PC board - Internal power supply assembly
25C2670-60103Back cover - Covers the back of the printer
26C2670-60114Trough assembly
27C2670-60110Carriage rail assembly - Has four star wheels on the leading edge - Old part had five star wheels on the leading edge and two on the trailing edge - New part has four star wheels on the leading edge

Другие узлы для данной модели:
Main Assembly Locator