| | 07470-40011 | | Right pen holder arm - Attaches to carriage block | | NO LONGER SUPPLIED |
|
| | 07470-40012 | | Left pen holder arm - Attaches to carriage block | | NO LONGER SUPPLIED |
|
| | 07470-40006 | | Pen holder arm (Pawl) - Attaches to pen stable (2 used) | | NO LONGER SUPPLIED |
|
| | 07470-40007 | | Right pen capper arm - Caps pen when in stable | | NO LONGER SUPPLIED |
|
| | 07470-40008 | | Left pen capper arm - Caps pen when in stable | | NO LONGER SUPPLIED |
|
| | 07470-40022 | | Right pinchwheel arm | | NO LONGER SUPPLIED |
|
| | 07470-40023 | | Left pinchwheel arm | | NO LONGER SUPPLIED |
|
| | 7200-1686 | | Pen lift bar (Metal) - Attaches to pen lift solenoid | | NO LONGER SUPPLIED |
|
| | 07470-40024 | | Pinchwheel lift bar - Has 'paper loading' handle | | NO LONGER SUPPLIED |
|
| | 1500-0622 | | Carriage belt | | NO LONGER SUPPLIED |
|
| | 13242G | | RS-232C cable - 25-pin (M) to 25-pin (M) - 5.0m (16ft) long - Connects to HP Vectra and IBM PC/AT compatibles |
|
| | 17255D | | RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles |
|
| | 24542G | | RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long - Connects to HP Vectra and IBM PC/AT compatibles |
|
| | C2913A | | RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles |
|
| | 07470-40016 | | Pen lift bar end cap - Has actuating pin which extends through the eyelet in the solenoid plunger | | NO LONGER SUPPLIED |
|
| | 07470-20015 | | Carriage block - Main part of carriage which arms attach to | | NO LONGER SUPPLIED |
|
| | 4040-1986 | | Top case - Does NOT include window | | NO LONGER SUPPLIED |
|
| | 7101-0643 | | Chassis - Internal structure/bed of plotter (Black plastic) | | NO LONGER SUPPLIED |
|
| | 07470-40004 | | Coupler ring - For coupling motor to grit wheel drive shaft | | NO LONGER SUPPLIED |
|
| | 07470-40005 | | Coupler end cap - For coupling motor to grit wheel shaft - Mounts on end of grit wheel shaft | | NO LONGER SUPPLIED |
|
| | 07475-40005 | | Pen carriage damper (Rubber boot) - On back of carriage assembly | | NO LONGER SUPPLIED |
|
| | 2110-0016 | | Fuse - 600mA, 250V max - .25in dia. x 1.25in long, glass body - Fuse - 600mA, 250V - For 100V/120V operation | | NO LONGER SUPPLIED |
|
| | 2110-0655M | | Fuse - 3.15A, 250V max - 5.2mm dia. x 20mm long, glass body - Fuse - 3.15A, 250V - F1 on main logic board |
|
| | 0380-0644 | | Hex standoff - 6-32 thread, 0.327-in long, male/female - Steel with black copper/nickel finish - For mounting HP-IB connector | | NO LONGER SUPPLIED |
|
| | 1251-7828 | | Connector lock, screw type (hex standoff) - For Amphenol 17 connector - For RS-232C connector (option 001) (two used) | | NO LONGER SUPPLIED |
|
| | 0510-1294 | | External retaining E-ring - 0.125-in diameter - Beryllium copper, nickel plated - For securing pinchwheel to arm (two used) | | NO LONGER SUPPLIED |
|
| | See Description | | This is a special part number - Do not remove it or alter the description - Nameplate - Silkscreened on Front Panel Plate |
|
| | 07470-90000 | | 7470A graphics plotter service manual | | NO LONGER SUPPLIED |
|
| | 07470-90001 | | 7470A graphics plotter interfacing and programming manual | | NO LONGER SUPPLIED |
|
| | 07470-90002 | | 7470A graphics plotter operating manual | | NO LONGER SUPPLIED |
|
| | 07470-90003 | | 7470A graphics plotter interconnecting guide | | NO LONGER SUPPLIED |
|
| | 07470-90008 | | 7470A graphics plotter operating manual (French) | | NO LONGER SUPPLIED |
|
| | 07470-60180 | | Motor/encoder assembly - Y' axis drive (carriage) | | NO LONGER SUPPLIED |
|
| | 07470-60175 | | Motor/encoder assembly - 'X' axis drive (Grit wheel) | | NO LONGER SUPPLIED |
|
| | See Description | | Nameplate - Silkscreened on Front Panel Plate |
|
| | 07470-60103 | | Main logic board - With HP-IL interface - Main Logic Board - with HP-IL Interface (Option 003) | | NO LONGER SUPPLIED |
|
| | 07470-66121 | | Main logic board - With RS-232C interface - Main Logic Board - with RS-232C Interface (Option 001) | | NO LONGER SUPPLIED | | REQUIRES RETURN OF DEFECTIVE PART |
|
| | 07470-60121 | New part for 07470-66121 |
| | 07470-66122 | | Main logic board - With HP-IB interface - Main Logic Board - with HP-IB Interface (option 002) | | NO LONGER SUPPLIED | | REQUIRES RETURN OF DEFECTIVE PART |
|
| | 07470-60122 | New part for 07470-66122 |
|
| | 7121-2501 | | Front panel plate - Has cutouts for control panel keycaps | | NO LONGER SUPPLIED |
|
| | 07470-40009 | | Right Pen Stable - Holds pen when not plotting | | NO LONGER SUPPLIED |
|
| | 07470-40010 | | Left Pen Stable - Holds pen when not plotting | | NO LONGER SUPPLIED |
|
| | 07475-40030 | | Pinchwheel - Does NOT include retaining ring (2 used) | | NO LONGER SUPPLIED |
|
| | 7121-2495 | | Cover plate - For RS-232C connector - For option 001 | | NO LONGER SUPPLIED |
|
| | 7121-2497 | | Cover plate - For HP-IB connector - For option 002 | | NO LONGER SUPPLIED |
|
 | 8120-1351 | | Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
|
| | 8120-1369 | | Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China) |
|
| | 8120-1378 | | Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) | | |
|
| | 8120-1689 | | Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
|
| | 8120-2104 | | Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland) | | RESTRICTED SALES (NOT FOR TRADE SALE) |
|
| | 8120-2956 | | Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark) |
|
| | 8120-4211 | | Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India) | | RESTRICTED SALES (NOT FOR TRADE SALE) |
|
| | 07470-60124 | | Power module assembly - Includes fuse holder and power switch (black plastic structure) - Mounts on left rear of chassis | | NO LONGER SUPPLIED |
|
| | 1531-0219 | | Slider rod - Shaft that the carriage assembly rides on | | NO LONGER SUPPLIED |
|
| | 07470-60150 | | Grit wheel shaft assembly for paper drive | | NO LONGER SUPPLIED |
|
| | 07475-60015 | | Pen lift solenoid assembly - Pen lift solenoid assembly with solenoid coil and plunger - Connects to pen lift bar via end cap | | NO LONGER SUPPLIED |
|
| | 1460-1932 | | Pen holder garter spring ('doughnut' shaped) - Stainless steel, passivity finish, 45mm long, 1.59mm OD, 200um wire diameter - Provides pressure for the pen holding arms | | NO LONGER SUPPLIED |
|
| | 1460-2029 | | Compression spring - 302 stainless steel, 1.18in long, 0.334in OD, 0.012in wire diameter, 0.13 in/lb rate - Between the two halves of carriage assembly | | NO LONGER SUPPLIED |
|
| | 1460-2032 | | Extension spring for pinchwheel arms - Two used | | NO LONGER SUPPLIED |
|
| | 9100-4238 | | Power transformer (7470) - 100/120/220/240VAC input, 15.2/30.3/9.98/20.3VDC outputs | | NO LONGER SUPPLIED |
|
| | 4040-2002 | | Lift-up viewing window - Located on top cover | | NO LONGER SUPPLIED |
|
